TAYSIDE CUT & EDGE
Trade Panel Processing · Blairgowrie
Cutlist@taysidecutandedge.co.uk
07876 614 414
07876 614 414
Submit a Cutlist
// Enter your panels below and submit — we'll come back to you with pricing
1Cutlist
2Details
3Confirm
Saved a cutlist with us before? Load it to edit and resubmit — no need to re-type everything.
Default MaterialAuto-fills every row — override per row if needed
Egger MFC codes in dropdown (204 codes) · For MDF or Plywood type e.g. MDF 18mm or Ply 18mm and press Enter · Override material on any row
CutlistAll dimensions in mm · finished panel sizes
Dimensions are finished panel sizes — we apply kerf and trim allowances.
Tick which edges need banding and select the EB type per row.
1mm ABS is recommended for most MFC.
Use 2mm ABS for a heavier edge; 0.6mm card for painted MDF.
| # | Description / Label | Length | Width | L1 | L2 | W1 | W2 | EB Type | Qty | Material |
|---|
Shaker DoorsOptional · MR MDF 5-piece doors — built to your sizes
Enter finished door sizes (Height × Width). Standard build is 22mm MR MDF frame, 9mm panel, 70mm rails — note anything different (thickness, finish, hinge boring) in the Notes box on the next step.
Panels = number of flat panels (1 = plain shaker; 2+ adds mid-rails). Leave Rail blank for our standard 70mm, or enter your preferred rail width. Leave Mid-rail blank for even spacing, or give the height from the bottom of the door to the centre of the mid-rail.
| # | Door / Location | Height | Width | Qty | Panels | Rail (mm) |
Mid-rail c/l from bottom |
|---|